Dimensional Tech/Inspector (C.A.M.S. & LASER TRACKING) -- Leona, CA
Leona Valley, CA Leona Valley, CA Contract Contract $35 - $55 an hour $35 - $55 an hour 23 hours ago 23 hours ago 23 hours ago Dimensional Tech/Inspector (C.
A.
M.
S.
& LASER TRACKING) -- Leona, CA $35-$55 DOE!!!!! 6 YEARS OF EXPERIENCE OR MORE TO APPLY!!!! Dimensional Tech/Inspector (C.
A.
M.
S.
& LASER TRACKING) -- Leona, CA $35-$55 DOE!!!!! 6 YEARS OF EXPERIENCE OR MORE TO APPLY!!!! Dimensional Tech/Inspector (C.
A.
M.
S.
& LASER TRACKING) -- Leona, CA $35-$55 DOE!!!!! 6 YEARS OF EXPERIENCE OR MORE TO APPLY!!!! MUST BE US CITIZEN!!!! MUST BE US CITIZEN!!!! No secret but need to be CLEARABLE (willing and able to obtain); if active or current secret, that is a plus Basic
Qualifications:
6 years of experience with assorted Computer-Aided Measurement Systems (C.
A.
M.
S.
) and/or Laser Tracking Interferometer or non-Interferometer Systems (FARO-LEICA-API).
Must be familiar with multiple computer aided metrology systems such as Laser trackers, articulated arms, scanners, 6DoF (Six Degree of Freedom) etc.
Experience with inspection, maintenance/repair, testing and optical and mechanical alignment/adjustment of laser modules and laser tracking systems.
Experience with calibration/compensation of instrument to ensure quality measurements.
Experience with computer aided graphic interfaces (Verisurf X, SA and Maya matrix, Build!IT, Polyworks).
Experience in data collection for the Validation/Verification of Tooling and Production Engineering.
Coordination with Manufacturing.
Engineering, Quality, and Tool Design to interpret, analyze, and advise on the data results.
Experience with assembly tooling and/or composite tooling.
Experience in Microsoft Office suite.
Ability to communicate/interface with multiple levels, such as Manufacturing Engineering, Quality Assurance, and Tool Design to interpret, analyze, and advise on the data results.
Education:
Minimum of a High School Diploma/GED and Preferred Qualifications (NOT required):
Experience in 3D modeling systems (CATIA UG, V5, R22).
Experience in reverse engineering and model building from collected data Ability to implement Lean Thinking in the operations and documentation of Computer-Aided Measurement Systems (C.
A.
M.
S.
).
Knowledge of Theodolite systems, Photogrammetric laser radar systems, laser scanning systems and articulating arms.
Canned Boiler Plate Description from HR Manual Provides technical support to engineers on a variety of technical tasks.
Gathers, maintains, formats, compiles, and manipulates technical data, such as laboratory or material test results and engineering design changes.
Produces engineering documentation, reports, drawings (flow charts, block diagrams, and schematics).
Performs detailed mathematical calculations using established formulas; preliminary analyses of data where guidelines are provided in such areas as trajectory adequacy, model dimensional consistency; and quantitative judgments concerning technical data.
Uses personal computer in performance of analyses and development of documentation/reports.
May conduct tests and record data to assist with engineering evaluation or analysis.
Job Type:
Contract Pay:
$35.
00 - $55.
00 per hour
Benefits:
401(k) Schedule:
8 hour shift Ability to commute/relocate:
Leona Valley, CA:
Reliably commute or planning to relocate before starting work (Required)
Experience:
Metrology:
6 years (Required) Work Location:
In person Provides technical support to engineers on a variety of technical tasks.
Gathers, maintains, formats, compiles, and manipulates technical data, such as laboratory or material test results and engineering design changes.
Produces engineering documentation, reports, drawings (flow charts, block diagrams, and schematics).
Performs detailed mathematical calculations using established formulas; preliminary analyses of data where guidelines are provided in such areas as trajectory adequacy, model dimensional consistency; and quantitative judgments concerning technical data.
Uses personal computer in performance of analyses and development of documentation/reports.
May conduct tests and record data to assist with engineering evaluation or analysis.
.
Estimated Salary: $20 to $28 per hour based on qualifications.
A.
M.
S.
& LASER TRACKING) -- Leona, CA $35-$55 DOE!!!!! 6 YEARS OF EXPERIENCE OR MORE TO APPLY!!!! Dimensional Tech/Inspector (C.
A.
M.
S.
& LASER TRACKING) -- Leona, CA $35-$55 DOE!!!!! 6 YEARS OF EXPERIENCE OR MORE TO APPLY!!!! Dimensional Tech/Inspector (C.
A.
M.
S.
& LASER TRACKING) -- Leona, CA $35-$55 DOE!!!!! 6 YEARS OF EXPERIENCE OR MORE TO APPLY!!!! MUST BE US CITIZEN!!!! MUST BE US CITIZEN!!!! No secret but need to be CLEARABLE (willing and able to obtain); if active or current secret, that is a plus Basic
Qualifications:
6 years of experience with assorted Computer-Aided Measurement Systems (C.
A.
M.
S.
) and/or Laser Tracking Interferometer or non-Interferometer Systems (FARO-LEICA-API).
Must be familiar with multiple computer aided metrology systems such as Laser trackers, articulated arms, scanners, 6DoF (Six Degree of Freedom) etc.
Experience with inspection, maintenance/repair, testing and optical and mechanical alignment/adjustment of laser modules and laser tracking systems.
Experience with calibration/compensation of instrument to ensure quality measurements.
Experience with computer aided graphic interfaces (Verisurf X, SA and Maya matrix, Build!IT, Polyworks).
Experience in data collection for the Validation/Verification of Tooling and Production Engineering.
Coordination with Manufacturing.
Engineering, Quality, and Tool Design to interpret, analyze, and advise on the data results.
Experience with assembly tooling and/or composite tooling.
Experience in Microsoft Office suite.
Ability to communicate/interface with multiple levels, such as Manufacturing Engineering, Quality Assurance, and Tool Design to interpret, analyze, and advise on the data results.
Education:
Minimum of a High School Diploma/GED and Preferred Qualifications (NOT required):
Experience in 3D modeling systems (CATIA UG, V5, R22).
Experience in reverse engineering and model building from collected data Ability to implement Lean Thinking in the operations and documentation of Computer-Aided Measurement Systems (C.
A.
M.
S.
).
Knowledge of Theodolite systems, Photogrammetric laser radar systems, laser scanning systems and articulating arms.
Canned Boiler Plate Description from HR Manual Provides technical support to engineers on a variety of technical tasks.
Gathers, maintains, formats, compiles, and manipulates technical data, such as laboratory or material test results and engineering design changes.
Produces engineering documentation, reports, drawings (flow charts, block diagrams, and schematics).
Performs detailed mathematical calculations using established formulas; preliminary analyses of data where guidelines are provided in such areas as trajectory adequacy, model dimensional consistency; and quantitative judgments concerning technical data.
Uses personal computer in performance of analyses and development of documentation/reports.
May conduct tests and record data to assist with engineering evaluation or analysis.
Job Type:
Contract Pay:
$35.
00 - $55.
00 per hour
Benefits:
401(k) Schedule:
8 hour shift Ability to commute/relocate:
Leona Valley, CA:
Reliably commute or planning to relocate before starting work (Required)
Experience:
Metrology:
6 years (Required) Work Location:
In person Provides technical support to engineers on a variety of technical tasks.
Gathers, maintains, formats, compiles, and manipulates technical data, such as laboratory or material test results and engineering design changes.
Produces engineering documentation, reports, drawings (flow charts, block diagrams, and schematics).
Performs detailed mathematical calculations using established formulas; preliminary analyses of data where guidelines are provided in such areas as trajectory adequacy, model dimensional consistency; and quantitative judgments concerning technical data.
Uses personal computer in performance of analyses and development of documentation/reports.
May conduct tests and record data to assist with engineering evaluation or analysis.
.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
